Dear All
What is the procedure to enter the (oils, grees etc.) in sterile area for maintence the machine.
Regards
KUMAR
Dear All
What is the procedure to enter the (oils, grees etc.) in sterile area for maintence the machine.
Regards
KUMAR
Lubrication and Maintenance of Industrial Machinery -Best Practices and Reliability
Edited by Robert M . Gresham and George E . Totten
CRC Press 2009
Dry heat sterilize the needed substances at 121C for 30 minits
Or
Autoclave it at 121C for 30 minits.
Look my post in GMP section about Lubricants and standards in Clean rooms.