Autoclave Validation

mirtaheri · July 23, 2008, 8:10am

I Want To Know About Acceptance Criteria Of Autoclave Validation.if I Assume Minimum F0 15 Min For Thermoucoples I Placed In The Load ,and Sal 10 -6 ,and A Kit Of B.stearothermoplillus Placed In Load.and Evaluating For Groth.it Is Enough?

rvs1232003 · July 25, 2008, 5:52am

hello friend its enough for indian WHO

VINOD_PADMAKAR_KULKARNI · July 25, 2008, 6:20am

Can any body give me the basic regulatory guidelines on autoclave validation?

VINOD_PADMAKAR_KULKARNI · July 25, 2008, 6:24am

is the difference between temp readings observed in between PLC & Recorder is acceptable in a sterilizer?? if yes then what is the limit??

rvs1232003 · July 25, 2008, 6:25am

HELLO ALL DETAIL GIVEN IN HTM 2010 FOR STERILIZAION, I AM ALSO IN INJECTION

rvs1232003 · July 25, 2008, 6:27am

NO +AND - 1 DEG

himanshumb · July 25, 2008, 7:22am

Please refer PDA TR-01 (2007), HTM2010 -03 & EN-285 for Autoclave Validation.

Regrds
Himanshu

VINOD_PADMAKAR_KULKARNI · July 25, 2008, 9:11am

Dear Himanshu, thanks for your reply.

Can you please give me the website if possible because it will be easy for me.

Sandip_Deshpande · October 11, 2008, 2:11pm

The sHTM guideline in draft form you will get on internet also. or otherwise i can mail you. my mail id is sandee321@rediffmail.com. Kindly give your email id.

VINOD_PADMAKAR_KULKARNI · October 13, 2008, 6:29am

My e mail ID is vinod76kulkarni@yahoo.com.please send me the guidelines.

Sandip_Deshpande · February 21, 2009, 1:03pm

Dear Vinod,
I have already forwarded the guideline to you. Since i am in the autoclave validation. Please free to contact me.

rvs1232003 · February 27, 2009, 10:47am

pl send me also that guidline sir i am also want my mail id is rvs1232003@rediff.com sir i am working in production dept ( INJECTION)

mahaksinghchaudhary · February 28, 2009, 12:57am

Dear Sandeep & Vinod Kulkarni

Please check your mail , i have been send HTM 2010 on your mail.

anup_s82 · March 3, 2009, 10:44am

please send the guideline on anup_s82@yahoo.com i am interested to know about autoclave validation.

wes77 · March 6, 2009, 9:48pm

please send me a copy to bigwes77@yahoo.com thanks

joksavs · March 13, 2009, 3:51pm

please send me a copy to joksimoviczeljko@gmail.com, i am interested , too.

Al_Pharao_Air_Data · April 16, 2009, 7:29am

Kind Attn : Mr. VINOD PADMAKAR KULKARNI

Request to send me regulatory guidelines on autoclave validation

My Email ID : al_pharao@yahoo.co.in

True Regards

A.Aziz
Al Pharao Air Data

Ravindra_Akolkar · June 13, 2009, 4:54pm

Dear Himanshu,
Please email EN285 guidline, my email id is

ravi_akol@rediffmail.com

Thanks,
Ravindra.

iwbic80 · June 16, 2009, 1:58am

please send me a copy to barat1980@gmail.com, i am also interested , too.

Bharat

sojitra_pankaj2003 · June 23, 2009, 7:34am

Form as per my suggestion HTM 2010 is the suitable guideline for autocalve validation.

Regards,
Pankaj Sojitra.